Products
-
Conveyor belt vulcanizing press for hot splicing
The main parts of vulcanization joint machine are made of high strength aluminum alloy. It is equipped with automatic explosion-proof electric cabinet and has 0-2Mpa even pressure offered by the pressure system, so it is easily operated, portably carries. It warms up by electric heating element, so it works stably with high thermal efficiency and homogeneous temperature.
1. Vulcanization pressure 1.0-2.0 MPa;
2. Vulcanization temperature 145°C;
3. Difference in surface temperature of vulcanized plate ± 2°C;
4. Heating up time ( from normal temperature to 145°C )<25 minutes;
5. Voltage 220V/ 380V/415V/440V/480V/550V/660V, 50/60HZ, 3 phases;
6. Temperature adjustment range: 0 to 199°C;
7. Timer adjustment range: 0 to 99 minutes;
-
Air pressure water cooled vulcanization machine
1) It’s equipped with ZJL automatic control box. In case automatic control failure, you can switch to the manual control mode.
2) Classic high tensile aluminum alloy. When pressure reaches to 2Mpa, it only creates invisible deformation.
3) Durable steel clamping device, special structural design, safe and reliable.
4) Electric water pump, save time and flexible to control vulcanizing pressure. It makes the same vulcanizer suit for various conveyor belting project ( air pressure system for optional).
5) Pressure device adopts rubber pressure bag, saving 80% weight than the traditional platen. Flexible rubber bladder provided uniform pressure and high effeciency. It passes the test of setting pressure 2.5 MPa and become the most popular pressure system.
6) Almex type heating blanket, whole heating plate made by hard aluminum alloy. Thickness is only 25 mm, to reduce weight and save energy. It only needs around 20 minutes to rise from room temperature to 145 ° C.
7) Build-in water cooling system, from 145 ℃ to 70 ℃ need only 15-20 minutes.
-
Sectional Belt Vulcanizing Press ZLJ Series Heavy-duty Type
New type Vulcanizing Press, one kind of heavy weight vulcanizer, use new design components, including pressure bag, traverse bars with standard heating platen and control box.
-
DB-G type Steel Cord Conveyor Belt Peeling Machine for Splicing
The DB-G type steel cord conveyor belt peeling machine is a new type of steel cord conveyor belt peeling equipment researched and developed by our company independently. It is divided into two types: ordinary type and explosion-proof type. It is easy to operate, high efficiency, and low labor intensity. It can complete the peeling work of various types of steel cord conveyor belts. It is a common auxiliary equipment for various steel cord conveyor belt vulcanization joints, which is uses in various scenarios. Domestically original and internationally leading.
The separation between the upper cover rubber, lower cover rubber, core rubber and steel wire ropes of various steel cord conveyor belts.
-
Rubber Pressure Bag for Belt Vulcanizing Press Machine
Antai Rubber Pressure Bag adopts full rubber design, no steel frame, lightweight and pressure distributed more evenly, effectively and efficiently. It’s applied to both water pressure and air pressure mode. It’s independently designed and developed by Antai’s own R&D center. The quality and performance is greatly appreciated in a variety of different markets throughout the world. It’s a good choice to be compatible with Almex vulcanizing press perfectly.
Our company’s R&D department lasted 5 years and successfully developed rubber high-pressure water bags in 2005. This revolutionary technology has completely overturned all types of conveyor belt vulcanizing press technology and perfectly replaced the old-fashioned vulcanizing press hydraulic plate. The joint effect reaches a new height. “ANTAI” vulcanizing machine has a leading position in the market competition with its core technology and high quality.
-
Cold Bond Cement for Rubber Conveyor Belt Splicing Adhesive
Antai TM 2020 Cold Bond Cement adopts German advanced technology and formula. It’s designed to be a fast curing cement for rubber conveyor belt splicing and jointing. It is an ideal adhesive for belt splicing, patching and all types of rubber fabrication, even underground.
While using TM 2020 Cold Bond Cement, it generally needs two parts to finish that work perfectly. Firstly, room temperature cures chloroprene based on liquid rubber adhesive. Secondly, when catalyzed with an appropriate amount of hardner, it yields high strength adhesion without any aid of heating, pressure or other equipment. TM 2020 Cement is able to bond rubber to metal, rubber to rubber, rubber to fiberglass, rubber to fabric, as well as the splicing, jointing and repair of rubber conveyor belt. It’s also be able to apply to most of rubber components repairing, splicing and patching.
When any job regarding rubber to metal, rubber to rubber, rubber to fiberglass, rubber to fabric, TM 2020 Cold Bond Cement is a good choice.
-
Edge Repair Vulcanizing Press for Rubber Conveyor Belt Repairing
Edge Repair Vulcanizing Press for Rubber Conveyor Belt, a rubber conveyor belt repairing machine, is mainly used for repairing small areas of conveyor belt, puncture damage, especially suitable for repairing long area tears and damages along the longitudinal direction, scratch repair, the middle belt repair, etc. It is one of the best tool and solution for hot vulcanization repair, a good helper for partial repair of conveyor belts. It’s easily used to repair conveyor belts on site. It’s time-saving, efficient and user-friendly.
-
Rail-mounted Spot Repair Vulcanizing Press for Conveyor Belt
Rail-mounted Spot Repair Vulcanizing Press for Conveyor Belt, a rubber conveyor belt spot splicing and repairing machine or tool, is used for repairing side or middle of rubber conveyor belt.
The advantage of this machine is that the heating platen is slideable, which is convenient for repairing small damage in the middle of the conveyor belt.
There are various heating platen sizes for choice, 300x300mm, 200x200mm, etc.
Customer can just tell us their work needs, so we can customize the machine as per the real work needs.
-
C-clamp Repair Vulcanizing Press for Rubber Belt Spot Repairing
YXhydraulic spot vulcanizing repair machine, also known as C-clamp spot repair vulcanizer, is an electric heating repair equipment for conveyor belt. During the belt conveying, the surface of the belt may be damaged or pierced by the conveyed material. Then the spot vulcanizing repair machine can be used to fix it .
The machine consists of frame, two heating plates, an integrated hydraulic lifter and an electric controbox. The frame is made of high-strength aluminum alloy, it’s smalsize, portable, safe and reliable. This machine is mainly applied to repair less than 300 * 300mm dot damage.
Features:
- Designed for fast repair and easy operation on spot damage;
- Duawheels design, make maneuver easier;
- Light and rugged aluminium C-type frame, suitable for positioning the damaged spot location;
- If the belt damage area is not too large, like dot, spot or smalpiece, you don’t need to use a big machine to repair it. C-clamp spot repair vulcanizing press would be a good choice. Lower budget, but fix a big problem.
-
PU PVC Belt Vulcanizing Press for Thermoplastic Belt Splice
This air cooled press has all components integrated into one tool, which makes the machine plugged in easily and ready for work. Fast and Portable Splicing, you can bring it to anywhere easily.
-
Lightweight Vulcanizing Press for Light Rubber Conveyor Belt
Lightweight rubber conveyor belt vulcanizing press, 2-piece press, aluminum frame style, designed for quick and easy operation, easy to move to any desired splice position, lightweight and high work efficiency. S
Two light and robust aluminium frames comprise upper and lower portions of the press. It’s equipped with two foldable handles on both ends of the upper frame, easy to move up and down. The control box feature dual temperature control, timer and indication system.
Features:
- Designed for fast and dependable belt splicing;
- Solid aluminum frame style;
- Lightweight, portable frame press;
- Fast heating system, use reliable Silicone Heating Elements;
- Rapid cooling system incorporated in platen design, cooling down from 145°C to 75°C, only 5 mins.
